Extensometers Are a ZwickRoell Core Competence

Extension measurement is one of ZwickRoell’s core competences. ZwickRoell’s product portfolio includes extensometers with different resolution levels, measuring principles, and measurement travel. A distinction is generally made between contact and non-contact measurement of extension, change in width, or strain.

Which Extensometer Is the Right One?

The demands placed on extensometers vary as widely as the applications for which they are used. The criteria used to determine the most suitable extensometer for a given application or range of applications are also highly varied. The principal factors determining extension measurement requirements are the properties of the material to be tested, the specimen shape and dimensions, and the test standards that have to be complied with (for example, ISO 6892, ISO 527, ISO 10113 etc.). Among other things they define the test sequence, the characteristics to be determined, and with what accuracy, and the environmental conditions, such as the test temperature.

ZwickRoell has a comprehensive selection of extensometers, ranging from an analog clip-on instrument to the fully automatic universal extensometer. ZwickRoell extensometers are designed with the operator in mind. They should be as simple as possible to clamp on the specimen and to operate. Our many years of experience in developing and designing extensometers, manufacturing the instruments in-house from start to finish and performing a wide variety of installations are your guarantee of state-of-the-art extensometry. ZwickRoell’s innovations have placed the company at the cutting edge in many areas.

The key advantages and features of non-contact extensometers

  • The behavior of the specimen is not subjected to any influences caused by knife edges or drag force, therefore it is not damaged and falsification of test results is ruled out.
  • The systems have an extremely long service life.
  • Non-contact extensometers are suitable for specimens that tend to whiplash at specimen break (elastomers, wires, ropes) as well as for notch- and break-sensitive specimens.
  • Required accuracy classes 0.5 and 1 are available.
  • No thermal bridges when using temperature chambers since measurement takes place via a heatable window.
  • Selectable gage length:
  • Application of gage marks with the appropriate separation distance
  • Without gage marks: use of natural surface pattern (for example, the ribs of reinforcing steel)
  • Use of a superficial surface pattern (spray pattern, laser speckle pattern)
  • In addition to results for standard-compliant application tests, non-contact measuring systems provide other useful information such as
  • Biaxial strain: Determination of the transverse strain and reduction in area
  • Measurement of strain distribution
  • Deflection measurement
  • 2D dot matrix measurement: to determine local strains of a flat specimen area in 2 axes (2D)
  • Recording and storing of live images for test re-run with modified measurement ranges
  • Video documentation

Saksassa valmistettua laatua

Valmistamme tuotteemme mahdollisimman huolellisesti ja tarkasti, ja testauslaitteemme edustavat uusimpia teknisiä innovaatioita, toimialasta riippumatta. Koestuskoneemme heijastelevat mitä suuremmissa määrin "Made in Germany"-brändin mukaista laatua. Kaikki testausjärjestelmämme on valmistettu EU:n nykyisen konedirektiivin mukaisesti.

Koe tämä kaikki itse jokavuotisessa testXpo-näyttelyssämme Saksan Ulmissa.

Tohtori Jan Stefan Roell
testXpo-teltta
  • Made in Germany
  • Turvallisuutta koko testausjärjestelmälle
  • Ergonominen käyttää
  • Joustava ja valmiina myös tulevaisuuden testaustarpeisiin
Ylös